High-Quality Exterior Painting in Vermont

Every home is different, so the honest answer is that it depends on a handful of things: the square footage and number of stories, the condition of the existing siding and trim, how much prep and repair work is needed before a brush touches the house, and whether you’re changing colors or refreshing the current one. A home that needs significant scraping, priming, or carpentry repair will cost more than one that’s structurally sound and just due for a refresh. Reach out and we’ll walk the property with you and put together a detailed estimate.

Late spring through early fall is the window. Most exterior paints need surface and air temperatures to stay above roughly 50°F — including overnight — and they need a stretch of dry weather to cure properly. Vermont’s painting season is shorter than it is further south, which means the calendar fills up fast. If you’re planning an exterior project for next year, reaching out over the winter puts you in a much better position.

Most homes land somewhere in the five to ten year range, though it varies a lot by siding material and exposure. South- and west-facing walls take the most sun and typically fade or chalk first, and anything that catches wind-driven snow and rain will weather faster than a sheltered elevation. Chalking, hairline cracking, peeling at the seams, or color that’s visibly uneven from one side of the house to the other are all signs it’s time.

Most exterior paints are dry to the touch within a few hours, but the recoat window is longer than that, and both are affected by temperature and humidity. Cool, damp Vermont mornings slow things down considerably, which is why we schedule coats around the forecast rather than the clock. Full cure — the point where the finish reaches its final hardness — takes considerably longer than dry time, and we’ll let you know what to avoid in the meantime.

Yes. Prep is the part of the job that determines whether the finish lasts, so we scrape and sand failing paint, address minor rot and damaged trim, and prime any bare wood before the topcoat goes on. Paint applied over a poor surface will fail no matter how good the product is.